TECH TIP --- Vertical Curing Application

DO NOT delay in applying the curing compound!

For vertical applications, apply two light coats.
Apply the second coat while the first coat is still wet.
During vertical spray applications, use a fine spray tip and apply
even coats avoiding run-downs or streaks.
Clear Dissipating Cure EF will normally begin to dissipate and wear off within 5-7 days after application. At this time product can
be removed with water under pressure or using scrubbing
equipment or with Dayton Superior Citrus cleaners or can be
allowed to fully dissipate on its own. The amount of
time required for full dissipation is dependent upon
application rate, environmental conditions and the
amount of traffic wear the surface receives.